Lexmark W812 Setup Guide - Page 45

Step11: Con for TCP/IP, Assigning a printer IPaddress - manual

Get Lexmark W812 PDF manuals and user guides View all Lexmark W812 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Step 11: Configure for TCP/IP If you have TCP/IP available on your network, we recommend that you assign an IP address to the printer. Assigning a printer IP address If your network is using DHCP, an IP address is automatically assigned after you connect the network cable to the printer. 1 Look for the address under the "TCP/IP" heading on the network setup page you printed in "Printing a network setup page" on page 38. 2 Go to "Verifying the IP settings" on page 40 and begin with step 2. Note: You can find instructions for other methods of setting the IP address in the online documentation on the drivers CD that shipped with your printer. Launch the CD, click View Documentation, and then Network Printer Install. If your network is not using DHCP, then you must manually assign an IP address to the printer. One of the easiest ways is to use the operator panel: 1 Press Menu until you see Network Menu, and then press Select. 2 Press Menu until you see Standard Network, and then press Select. Standard Network appears if you purchased a printer with a network port on the printer system board. If you have a MarkNet print server installed in the option card, you see Network Option 1. 3 Press Menu until you see Std Net Setup (or Network 1 Setup), and then press Select. 4 Press Menu until you see TCP/IP, and then press Select. 5 Press Menu until you see Set IP Address, and then press Select. Configure for TCP/IP 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
39
Configure for TCP/IP
Step 11: Configure for TCP/IP
/IP
If you have TCP/IP available on your network, we recommend that
you assign an IP address to the printer.
Assigning a
printer IP address
If your network is using DHCP,
an IP address is automatically
assigned after you connect the network cable to the printer.
1
Look for the address under the “TCP/IP” heading on the
network setup page you printed in “Printing a network
setup page” on page 38.
2
Go to “Verifying the IP settings” on page 40 and begin with
step 2.
Note:
You can find instructions
for other methods of setting the
IP address in the online
documentation on the
drivers CD that shipped with
your printer. Launch the CD,
click
View Documentation
, and
then
Network Printer Install
.
If your network is not using DHCP,
then you must manually assign an
IP address to the printer.
One of the easiest ways is to use the operator panel:
1
Press
Menu
until you see Network Menu, and then press
Select
.
2
Press
Menu
until you see Standard Network, and then press
Select
.
Standard Network appears if you purchased a printer with a
network port on the printer system board. If you have a
MarkNet print server installed in the option card, you see
Network Option 1.
3
Press
Menu
until you see Std Net Setup (or Network 1 Setup),
and then press
Select
.
4
Press
Menu
until you see TCP/IP, and then press
Select
.
5
Press
Menu
until you see Set IP Address, and then press
Select
.