Lexmark X852E Setup Guide - Page 14
Installing screws in the 500-sheet drawer and caster base - removal of tray 3
UPC - 734646002806
View all Lexmark X852E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installing screws in the 500-sheet drawer and caster base Drawer bottom 1 Remove a 500-sheet drawer from the carton. 2 Remove all packing material and tape from the drawer and paper tray. 3 If you are using a table or printer stand, then place the 500- sheet drawer in that location and go to step 8, otherwise continue to step 4. 4 Use a flat tip screwdriver to remove the rubber feet from the bottom of the 500-sheet drawer. 5 Place the drawer on the caster base. 6 Insert two long stabilizer screws (1) into the pockets of the 500- sheet drawer. The screws go through the drawer, caster cover, and into the caster frame assembly. 7 Tighten the screws securely. 8 If you have additional 500 or 250-sheet drawers, go to "Installing additional 500-sheet drawers" on page 10, "Installing 250-sheet drawers" on page 10 otherwise, go to "Installing the duplex unit" on page 11, or "Positioning the printer" on page 12. Assemble paper handling options 9