Lexmark X852E Setup Guide - Page 37
Step9: Set send and receive fax information, Understanding FCC fax requirements
UPC - 734646002806
View all Lexmark X852E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Step 9: Set send and receive fax information Understanding FCC fax requirements Note: See "Electronic emission notices" on page 48 and "Telecommunications notices" on page 48 for more FCC information. Note: If you do not have a TCP/IP environment, you must use the MFP control panel to set your basic fax information. During fax setup, you must assign some basic information. The Telephone Consumer Protection Act of 1991 requires all outgoing faxes to contain the following information in a margin at the top or bottom of each transmitted page, or on the first page of the transmission: • Date and time fax is sent • Station name (identification of the business, other entity, or individual sending the message) • Station number (telephone number of the sending fax machine, business, other entity, or individual) There are three methods to enter your fax setup information. They are 1) manually entering the information through the MFP control panel, 2) using your browser to access the MFP IP address and then entering the Configure menu, or 3) using MarkVision Professional to access the MFP IP address and enter the Configure menu. Use the following table to find the instructions for the method you want to use. Method Performing manual fax setup Performing browser fax setup Using MarkVision Professional to set fax information Page 33 34 35 Set send and receive fax information 32