Lexmark X852E Setup Guide - Page 45

Step11: Verify MFP setup, Making a test copy, Sending a test fax, Testing scan to network

Get Lexmark X852E - Mfp PDF manuals and user guides
UPC - 734646002806
View all Lexmark X852E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Step 11: Verify MFP setup Making a test copy Copy mode is the default setting of the control panel. 1 Make sure the Ready message is displayed. 2 Place your original document in the scanner. 3 Press Go/Send to send a copy to your printer. Sending a test fax Note: If Send/Fax is disabled, this option does not appear. Send a one page test fax to someone and ask for feedback. 1 Press Fax/Scan Mode once. Enter Phone # is displayed on the MFP control panel. 2 Use the numeric keypad on the control panel and enter the phone number of the person receiving the fax. 3 Place your original document in the scanner. 4 Press Go/Send to send a fax. Testing scan to network Test your scan to network functions by creating Scan Profiles or scanning to permanent destinations. You can only test the scan to network functions that you configured during setup. For example, to test Scan to E-mail, you must have created at least one permanent e-mail destination. Otherwise, SCAN → EMAIL does not appear as a scan to network mode in the MFP control panel. Verify MFP setup 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
40
Verify MFP setup
Step 11: Verify MFP setup
Making a test copy
Copy mode is the default setting of the control panel.
1
Make sure the
Ready
message is displayed.
2
Place your original document in the scanner.
3
Press
Go/Send
to send a copy to your printer.
Sending a test fax
Send a one page test fax to someone and ask for feedback.
Note:
If Send/Fax is
disabled, this option does
not
appear.
1
Press
Fax/Scan Mode
once.
Enter Phone #
is displayed on
the MFP control panel.
2
Use the numeric keypad on the control panel and enter the
phone number of the person receiving the fax.
3
Place your original document in the scanner.
4
Press
Go/Send
to send a fax.
Testing scan to
network
Test your scan to network functions by creating Scan Profiles or
scanning to permanent destinations.
You can only test the scan to network functions that you configured
during setup. For example, to test Scan to E-mail, you must have
created at least one permanent e-mail destination. Otherwise,
SCAN
→
EMAIL does not appear as a scan to network mode in the
MFP control panel.