Linksys SPA921 Cisco Small Business IP Phone SPA9XX User Guide - Page 40

Using Basic Phone Functions Using Phone Hardware and Accessories 3 Using the Headset with Your IP Phone NOTE: Steps to use your headset with the SPA IP Phone may vary. Consult the user documentation for your headset for more information. To use a wired headset, press the Headset button on your phone and dial the number to place a call, or press the headset button to answer a ringing call. To use a wireless headset, lift the receiver off hook before speaking or listening through the headset. Switching Between the Handset/Headset/Speakerphone During a Call Any of these audio devices can be used during a call. Only one device at a time can be used. The handset can be on the hook when using the speakerphone or headset function. If switching from the handset to the speakerphone, make sure the speakerphone or headset light is illuminated before placing the handset back on the hook. (If you are switching from the handset to a wireless headset, however, do not replace the handset or you will disconnect the call.) Sending Audio to the Phone Speaker Choosing this option sends audio to the speaker when the handset is lifted. STEP 1 Press the Setup button. STEP 2 Select Preferences. STEP 3 Choose Send Audio to Speaker > Edit. STEP 4 Press Y/N to enable or disable the feature. STEP 5 Press OK. STEP 6 Press Save. Cisco Small Business IP Phone SPA9XX User Guide 39