Logitech Harmony Ultimate User's Guide - Page 52

Logitech Harmony Ultimate Device is not changing channels properly The inter-key delay time is too short Depending on the device, a different sequence of buttons may be required to change channels Change the delay time using your remote or with MyHarmony as described in Harmony Ultimate sends commands slowly in activities Fix the channel tuning settings in MyHarmony: Change delays 1. Sign in to your MyHarmony account. 2. Click the Harmony Ultimate image. 3. Click Favorites. 4. Click Adjust How You Change Channels. 5. Select the method for changing channels that is used by your original remote and click Save. An Activity works when I select it as the first Activity when I power on my system, but not when I select it while I'm using another Activity I want to add a new Activity or change how an Activity is defined The right devices turn on but the play/stop/other buttons don't operate the device. The inter-device delay time is too short or too long Accurate device operation information was not available for your device Change the delay time using your remote or with MyHarmony as described in Harmony Ultimate doesn't switch between activities without using the Help feature Change delays Go to MyHarmony and follow the steps for Adding more Activities or Changing Activity . Follow the steps for Customizing buttons and on-screen commands One or more devices does not respond to the Harmony system There is a physical obstruction between your remote and your hub One or more of your devices needs to be controlled by the Harmony remote, not the hub Remove any physical obstructions or change how your Hub assignments control your devices. Configure the remote to send IR (infrared) signals directly to devices: 1. Tap the icon on the remote. 2. Tap Settings > Devices > Hub assignments. 3. Select the device that is not responding. 52