Marantz AV8003 AV8003 User Manua - Page 41

ENGLISH NAMES AND FUNCTION CONNECTIONS SETUP BASIC OPERATION 6-1 PRESET G. EQ ADJ These modes allow you to set a 9-band graphic equalizer for each of the 7 channels. 1. Select "6. ACOUSTIC EQ" from MAIN MENU with the 3 or 4 cursor buttons and press the ENTER button. 2. Select "PRESET G. EQ ADJ" with the 3 or 4 cursor buttons. 3. Press the ENTER button to enter the selection. PRESET ADJUST RESET:CH 63 CH :FL 125 +9 250 500 0dB 1k 2k -20 4k 63 250 1k 4k 16k 125 500 2k 8k 8k 16k 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 RETURN EXIT RESET: Using the 1 or 2 cursor buttons, select the channel(s) to be reset to either the currently displayed channel ("CH") or all channels ("ALL"), and press the ENTER button to enter the setting. "ALL" : Resets all channels. "CH" : Resets only the currently displayed channel. CH: Select the channel ("FL", "C", "FR", "SR", "SBR", "SBL" or "SL") to adjust with the 1 or 2 cursor buttons, and switch to the adjustment mode with the 4 cursor button. Frequency: Select the target frequency on the graph with the 1 or 2 cursor buttons and press the ENTER button to enter the selection. Adjust the level with the 3 or 4 cursor buttons. (Note that this can be adjusted to any level between -20 and +9 dB in 0.5 dB increments.) Move to the next frequency with the 1 or 2 cursor buttons, and adjust the level. After you complete this portion of the setup, press the ENTER button to enter the settings. Move cursor to "RETURN" with the 3, 4 cursor buttons and press the ENTER button. 38 6-2 CHECK AUTO These menus are for confirming the results of AUTO SETUP function equalizer measurement (AUDYSSEY, FRONT, FLAT). 1. Select "6. ACOUSTIC EQ" from MAIN MENU with the 3 or 4 cursor buttons and press the ENTER button. 2. Select "CHECK AUTO" with the 3 or 4 cursor buttons. 3. Press the ENTER button to enter the selection. CHECK MD:AUDYSSEY CH:FL +9 0dB -20 63 250 1k 4k 16k 125 500 2k 8k AUTO 63 125 250 500 1k 2k 4k 8k 16k 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 RETURN EXIT Select MD (mode) with the 3 / 4 cursor buttons followed by the desired equalizer ("AUDYSSEY", "FRONT", "FLAT"). CH: Select the channel to check with the 1 or 2 cursor buttons. Notes: • The frequency will not be exactly the same as in the Preset G. EQ modes. • FL and FR are not indicated on the CHECK AUTO 2 menu. 4. Once finished checking, select "RETURN" with the 3 / 4 cursor buttons and press the ENTER button to return to the "6. ACOUSTIC EQ" menu. 7 NETWORK SETUP These settings relate to playing music, photos, and movie files stored on a network device connected to this unit. 1. Select "7. NETWORK SETUP" on the MAIN MENU using the cursor buttons 3 or 4. 7.NETWORK SETUP VIDEO :NTSC RESOLUTION :480//576i SCREEN SAVER:ON RETURN NEXT EXIT 2. Select the menu you want to set using the cursor buttons 3 or 4, and press ENTER. • RESOLUTION: Use the 1 / 2 cursor buttons to select video signal resolution (pixel count) on the NETWORK PLAYER from the following options. "480/576i" ↔ "480/576p" ↔ "720p" ↔ "1080i" ↔ "AUTO" ↔ "480/576i" AUTO: Sets an appropriate resolution for a television that is connected using HDMI. (If the unit is not connected to the television using HDMI, the output is 480i/576i) (If connected by converting to DVI, the output is 480p/576p) 480i/576i: The output is 480i/576i. 480p/576p: The output is 480p/576p. 720p: The output is 720p. 1080i: The output is 1080i. Notes: • If a monitor connected using HDMI is changed during the AUTO setting, the screen returns automatically to the top menu and the resolution is changed to one that is appropriate for the monitor. If a dialog box or the TOOL menu is displayed at this time, the resolution is changed after the dialog box or TOOL menu is closed. • Set 480i/576i if you are using VIDEO/S-VIDEO output. • If you are using a monitor connected using HDMI, and the signal is being input from the network, the video signal is output in the resolution that was set in RESOLUTION. • SCREEN SAVER: Use the 1 / 2 cursor buttons to select "ON" or "OFF" for the screen saver from the video signal that is output from the unit. ON: If no operation is made for 10 minutes on the NETWORK screen or SETTING screen, the screen saver is activated on the monitor. (The screen goes dark) OFF: The screen saver is not activated even if no operation is made for 10 minutes. Notes: • The screen saver is not activated during photo display or video playback. • This setting can only be changed when the NETWORK function of this unit is selected. ADVANCED OPERATION REMOTE CONTROLLER TROUBLESHOOTING OTHERS