Marantz AV8003 AV8003 User Manua - Page 70

NAMES AND FUNCTION CONNECTIONS SETUP BASIC OPERATION ENGLISH CONTROLLING THE ZONE FUNCTION FROM ANOTHER ZONE The ZONE function can be controlled from another ZONE, even from a ZONE not set for this unit, by connecting a MARANTZ product with external IR receiver or infrared receiver using the RC2001 or Zone remote controller RC101. (See page 18) SET THE REMOTE CONTROLLER TO A MODE THAT CONTROLS ZONE A OR B. Operations such as switching the input source between ZONE A and B and turning the ZONE function on/off can be performed by setting the ZONE for using the remote controller. 3. 3. 1. 2. 2. 1. (In the example given here, the user changes the mode used to control ZONE A.) Hold down the SET button and ZONE button simultaneously until the Send indicator flashes twice. The backlight lights. 2. Press the ZONE A button. The Send indicator flashes twice when the setting is complete. The following buttons are now used for ZONE A only. Volume adjustment, sleep timer, mute, and input functions can be selected from the ZONE. POWER ON/OFF SOURCE VOL +/- MUTE CONTROLLING ZONE SPEAKERS Switch the remote controller to ZONE-A or ZONE-B mode. ZONE Speakers can be controlled on the first page of the remote controller. An RC101 remote controller set to ZONE A or ZONE B can be switched to control the ZONE Speaker function. 1. 3. 2. 1. 3. Press the ENTER button. Once settings are complete, the Send indicator flashes twice. The following buttons are used for set ZONE mode or ZONE Speaker mode only. POWER ON/OFF SOURCE INFO VOL +/- MUTE SLEEP 1. Press the HOME button. 2. Press the button umtil 003 is displayed. 3. Press the ZONE-A or ZONE-B button. ZONE A mode (default setting) ZONE B mode ZONE C mode (this zone not used by this unit) ZONE D mode: MAIN ZONE (the ZONE in which this unit is installed) 2. 1. INFO SLEEP Once the operation in 2. is performed, pressing the ZONE B button switches the mode being controlled to ZONE B. Pressing the ZONE D button switches the mode being controlled to MAIN ZONE. Notes: • If TUNER is selected as the input function for ZONE while a tuner (FM or AM and XM or SIRIUS) is being used by MAIN ZONE, that tuner cannot be operated from ZONE. Only the same broadcast station as that being tuned by the MAIN ZONE can be listened to. • ZONE output is analog only. Digital signal input is not supported. 1. (In the example given here, the setting for ZONE is switched to the setting for ZONE Speakers.) Hold down the SET button and POWER ON button simultaneously until the Send indicator flashes twice. The backlight continues to flash. 2. Press numeric key 2. ZONE mode: 1 (default setting) ZONE Speaker mode: 2 Notes: • To restore the settings for ZONE, press numeric key 1 in step 2. • Only the MAIN ZONE can be controlled when ZONE D mode is set. ADVANCED OPERATION REMOTE CONTROLLER TROUBLESHOOTING OTHERS 67