Marantz AV8003 AV8003 User Manua - Page 42

BASIC OPERATION SELECTING AN INPUT SOURCE 2. 2. Before you can listen to any input media, you must first select the input source on the unit. Example : DVD (Using the unit) STANDBY POWER ON/OFF INPUT SELECTOR PURE DIRECT M-DAX AV PRE TUNER AV8003 UP HDMI DOWN VOLUME SURROUND MODE AUTO PURE DIRECT PHONES ZONE THX ZONE SPEAKER 7.1CH INPUT SETUP MIC MENU EXIT ENTER BAND T-MODE MEMORY CLEAR TOP M-DAX DISPLAY 3. ≠ 1. 3. To select DVD, turn the INPUT SELECTOR knob on the front panel. (Using the remote controller) There are three ways to select DVD. 1. Press the HOME button. 2. Press the 1.DVD button. 3. Press the 1.DVD button. 2. 2. 1. 1. ≠ 2. 4. 4. 1. Press the HOME button 2. Press the 1 button. 3. 3. 1. Press the HOME button. 2. Press the AMP button. 3. Press the < / > button until 007 is displayed. 4. Press the DVD button. ENGLISH • As the input source is changed, the new input name will appear momentarily an OSD information on the video display. The input name will also appear in the display, on the front-panel. • If you use the FUNCTION RENAME feature (see page 25) , the renamed name appears on the display. • As the input is changed, this unit will automatically switch to the digital input, surround mode, attenuation, and night mode status which were entered during the configuration process for that source. • When a video source is selected, the selected video signal is output from the MONITOR OUT terminal. SELECTING THE SURROUND MODE Example: AUTO SURROUND DIALOGUE NORMALIZATION MESSAGE Dialogue Normalization (Dial Norm) is a feature of Dolby Digital. When playing back software which has been encoded in Dolby Digital, sometimes you may see a brief message on the FL display which will read "D-NORM X dB" (X being a numeric value). Dialogue Normalization serves to let you know if the source material has been recorded at a higher or lower level than usual. NIGHT MODE Useful at night or when loud noise is undesirable, this mode compresses the dynamic range, making it easier to hear quieter audio content without increasing the overall volume. Note that the effect of night mode is determined by the Dolby Digital content. Night mode may have no effect with content that does not support this function. STANDBY POWER ON/OFF INPUT SELECTOR PURE DIRECT M-DAX AV PRE TUNER AV8003 UP HDMI ≠ DOWN VOLUME SURROUND MODE AUTO PURE DIRECT PHONES ZONE ZONE SPEAKER THX 7.1CH INPUT SETUP MIC MENU EXIT ENTER BAND T-MODE MEMORY CLEAR TOP M-DAX DISPLAY (Using the unit) To select the Auto surround mode during playback, press the AUTO button on the front panel. (Using the remote controller) To select the Auto surround mode, press the HOME button, press the AMP button and press the < / > button until 005 is displayed. Press the AUTO SURR button. • For surround modes, see "Surround Mode" on page 41. • To add the THX mode to the Auto Surround mode, press either the THX button on the unit or the THX button on the remote controller. • To select a specific surround mode, Press the individual surround mode button on page 005, 006 on the remote controller. 2. 2. 1. 1. 1. To select this mode, switch the remote controller to AMP mode, and then press the < / > button until 003 is displayed. 2. Each time the NIGHT button is pressed, the mode changes according to the following options indicated on the front of the unit. 39 OTHERS TROUBLESHOOTING REMOTE CONTROLLER ADVANCED OPERATION BASIC OPERATION SETUP CONNECTIONS NAMES AND FUNCTION