Marantz AV8003 AV8003 User Manua - Page 89
Sys.setup
View all Marantz AV8003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
NAMES AND FUNCTION CONNECTIONS SETUP BASIC OPERATION ENGLISH 3. SYS.SETUP Display the MAIN MENU on the LCD of the RC2001, then press the button next to the "SYS.SETUP" indicator. The items below can be set in the SYS.SETUP screen. • CLOCK (Clock setting) • BACK LIGHT (Backlight illumination time setting) • LCD (LCD setting) • BEEP (Beep sound setting) • MEM CLEAR (Initialization setting) 2. Use the numeric buttons (0 to 9) and cursor buttons (t and u) to set the current time. After setting the correct time, press the ENTER button. BACK LIGHT (Backlight illumination time setting) Press the LIGHT button on the RC2001 to turn on the backlight, then set the time until the backlight turns off. 1. Press the button next to the "BACKLIGHT" indicator in the SYS.SETUP menu screen in the LCD to display the backlight illumination time setting screen. 3. The message "COMPLETED" is displayed on the LCD to indicate that the illumination time setting is completed. CLOCK (Clock setting) This sets the clock for the RC2001. 3. The message "COMPLETED" is displayed in the LCD to indicate that the clock setting is completed. 2. Press the buttons (right: +, left: -) displayed next to TIME to set the illumination time. The time can be set in 1-second intervals from 0 to 60 seconds. After deciding the settings, press the ENTER button. • Either press the ENTER button or wait three seconds for the LCD to automatically return to the SYS.SETUP menu. • Pressing the Home button returns the LCD to the MAIN MENU. Note: Setting the BACK LIGHT TIMER to 0 sec is equivalent to turning off the backlight so that the backlight does not turn on even when the LIGHT button is pressed. 1. Press the button next to the "CLOCK" indicator in the SYS.SETUP menu screen in the LCD to display the clock setting screen. • Either press the ENTER button or wait three seconds for the LCD to automatically return to the SYS.SETUP menu. • Pressing the Home button returns the LCD to the MAIN MENU. Notes: The clock can become out of sync over time. Please check it occasionally and set to the correct time if necessary. The clock setting is not backed up when the battery pack is replaced. Please reset the time after replacing the battery pack. ADVANCED OPERATION REMOTE CONTROLLER TROUBLESHOOTING OTHERS 86