Marantz AV8003 AV8003 User Manua - Page 91
Status Indicator, Reset, Programmable Codes - firmware
View all Marantz AV8003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
NAMES AND FUNCTION CONNECTIONS SETUP BASIC OPERATION ENGLISH MEM CLEAR (Initialization setting) This returns the settings made in the RC2001 to their initial settings. 1. Press the button next to the "MEM CLEAR" indicator in the SYS.SETUP menu screen in the LCD to display the initialization setting screen. 2. Press the button next to the "NO" (Disable) or "YES" (Enable) indicators on the LCD to either enable or disable initialization. Note: The LEARNING and CLOCK settings are not initialized. • Either press the ENTER button or wait three seconds for the LCD to automatically return to the SYS.SETUP menu. • Pressing the Home button returns the LCD to the MAIN MENU. 4. STATUS INDICATOR This displays the settings made in the MAIN MENU and the status of the remote device. Checking the status 1. Display the MAIN MENU on the LCD of the RC2001, then press the button next to the "STATUS" indicator. 2. Pressing the ENTER button cycles through the statuses of each of the items below. • Remaining learning memory • Remaining macro steps • LCD timer setting • Backlight timer setting • Beep setting • Firmware version • Current clock time Either press the ENTER button or wait three seconds so that the LCD returns to the MAIN MENU. 5. RESET If the RC2001 is not operating properly, use the procedure below to perform a reset (restart). Performing a reset does not erase the settings in the RC2001. 1. Remove the battery case cover. 2. Use a paper clip or other object to press the reset button in the reset hole as shown in the figure below to reset the RC2001. 3. Pressing the NO button automatically returns the LCD to the SYS.SETUP menu. Pressing the YES button displays "COMPLETED" on the LCD and completes initialization. The setting items that are initialized are shown below. • TIMER SETUP • BACK LIGHT TIMER • LCD • BEEP Note: Perform the reset with the battery pack loaded. 6. PROGRAMMABLE CODES Number of Programmable Codes This remote control has Flash memory 4M bit (512KB) that enables it to program remote control signals include the learned codes for up to 8000 codes. This number is for Marantz remote control codes. The actual number of codes may be less than 8000 depending on the type of the programmed remote control signals. Programmable Codes This remote control may be unable to learn the codes for some AV equipment due to the code types, system, or other differences. ADVANCED OPERATION REMOTE CONTROLLER TROUBLESHOOTING OTHERS 88