Motorola WR850G User Guide - Page 46
Options related to: ENABLING THE WR850 BUILT-IN DHCP SERVER, Options related - default ip
UPC - 612572095027
View all Motorola WR850G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Configuration Section 3 Field Default Gateway: (ADVANCED) Description Sets the IP address of the default gateway for the WR850 connections, when the Protocol field is set to Static. The default gateway is set by default to be the WR850 (i.e., the factory default IP address matches that of the WR850). NOTE: If Protocol (above) is set to DHCP, this field will be greyed out, and any data entered will not be used. FACTORY DEFAULT: 192.168.10.1 Options related to: ENABLING THE WR850 BUILT-IN DHCP SERVER Field DHCP Server: (ADVANCED) DHCP Starting IP Address: (ADVANCED) Description Sets the method by which IP addresses are assigned to devices that interface with the WR850 via the LAN connections (or "clients"). • Selecting Enabled engages the Dynamic Host Configuration Protocol (DHCP) server, which can dynamically assign (or "lease") IP addresses to clients. • Selecting Disabled disengages the DHCP server, requiring that you manually assign unique and permanent (or "static") IP addresses to clients. NOTE: The built-in DHCP Server is a router function. Therefore, this field, and the related DHCP Server fields below, are disabled or ignored if the Operation Mode on the BASIC Page is set to Access Point. NOTE: You will need to disable the DHCP Server, and assign static IP addresses, if you wish to use features on the ROUTING Page. FACTORY DEFAULT: Enabled Sets the start of the IP address range that the DHCP server will lease to clients. NOTE: This field is ignored if the DHCP Server (above) is Disabled. FACTORY DEFAULT: 192.168.10.2 WR850 3-13