NEC NP-PE401H User's Manual - Page 34
Powering On/Off the Projector
View all NEC NP-PE401H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Installation Powering On/Off the Projector Powering On the Projector When you first 1. Slide the lens cover. turn on the projector, you will get the Startup menu. This menu gives you the 2. Ensure that the power cord and signal cable are securely connected. The Power indicator will turn red. (*) 3. Turn on the projector by pressing "POWER" on the remote opportunity to select control or on the control panel. The Power indicator the menu languages. will flash blue. The startup screen (NEC logo) will be dis- To select the language, played. and the Power indicator will turn steady blue. use the , , , or button on the remote control. Select 4. Turn on your source (computer, notebook, video player,etc.) The projector will detect your source automatically. your language. Refer to Language on page If you connect multiple sources at the same time, use the 42. "SOURCE" button on the control panel or use "COMPUTER While the POWER 1", "VIDEO", "HDMI" on the remote control to switch in- indicator is blinking puts. blue in short cycles, the power cannot be 1 Lens Cover turned off by using the power button. (*)When "PowerSaving" is selected for "Standby Mode",the Power LED will turn red; when "Normal" is selected for "Standby Mode", the Power LED will turn orange. 2 Power Turn on the projector first and then the signal sources. or 27 ... English