NEC NP-PE401H User's Manual - Page 68
Replacing Procedure, To replace the filter
View all NEC NP-PE401H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Appendices To replace the filter CAUTION: • Before replacing the filter, remove dust and dirt from the projector cabinet. • The projector contains high-precision parts. Keep out dust and dirt during filter replacement. • Do not wash the filter with water. Water will damage the filter membrane. • Reattach the filter cover correctly. Failure to do so may cause projector malfunction. 2 1 Replacing Procedure: 1. Turn off the projector and disconnect the power cord. 2. Open the filter cover on the left side of the projector. u 3. Pull the filter from the filter cover. v 4. Replace the filter. Note: The filter has outside and inside. The filter cover with the filter in the opposite way cannot be attached to the projector. Attach the filter to the filter cover with a square mark (□) at the top left corner as shown in the drawing. 61 ... English