NEC NP-PE401H User's Manual - Page 65
Problem: LED lighting message, Power Indicator, Status Indicator, Lamp Indicator
View all NEC NP-PE401H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Appendices Problem: LED lighting message Power Indicator Indicator Condition Off Blinking light Blue 0.5 sec On, 0.5 sec Off 2.5 sec On, 0.5 sec Off Steady light Blue Orange Red Projector Condition The main power is off The projector is getting ready to turn on. -Wait for a moment. Note Off Timer is enabled. -- The projector is turned on. -- "Normal" is selected for "Standby Mode" -- "Power-Saving" is selected for "Standby Mode" -- Status Indicator Indicator Condition Off Projector Condition Normal or Standby ("Power-Saving" for "Standby -Mode") Note Blinking light Steady light Red Green Green Orange 2 cycle (0.5 sec Temperature error On, 0.5 sec Off) 3 cycle (0.5 sec Power error On, 0.5 sec Off) 4 cycle (0.5 sec Fan error On, 0.5 sec Off) 6 cycle (0.5 sec Lamp error On, 0.5 sec Off) The projector is cooling down Standby ("Normal" for "Standby Mode") CONTROL PANEL LOCK is on. The projector is overheated. Move the projector to a cooler location. Power unit is not working properly. Contact your dealer. Fans will not work correctly. Lamp fails to light. Wait a full minute and then turn on again. Wait for a moment. -You have pressed cabinet button when Control Panel Lock is on. Lamp Indicator Indicator Condition Off Blinking light Red Steady light Red Green Projector Condition Normal Lamp has reached its end of life. Lamp replacement message will be displayed. -Replace the lamp. Lamp has reached its end of life. The projector will Wait for a moment. not turn on until the lamp is replaced. "ECO Mode" is set to "On" -- Note English ... 58