NEC NP-PE401H User's Manual - Page 51
Setting | Signal
View all NEC NP-PE401H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
User Controls SETTING | SIGNAL "SIGNAL" is only supported in Analog VGA (RGB) signal. PHASE Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use this function to correct it. CLOCK Change the display data frequency to match the frequency of your computer's graphic card. Use this function only if the image appears to flicker vertically. H. POSITION Press the button to move the image left. Press the button to move the image right. V. POSITION Press the button to move the image down. Press the button to move the image up. English ... 44
44
English ...
User Controls
PHASE
Synchronize the signal timing of the display with the graphic card.
If the image appears to be unstable or flickers, use this function to
correct it.
CLOCK
Change the display data frequency to match the frequency of
your computer’s graphic card. Use this function only if the image
appears to flicker vertically.
H. POSITION
Press the
button to move the image left.
Press the
button to move the image right.
V. POSITION
Press the
button to move the image down.
Press the
button to move the image up.
“SIGNAL” is
only supported in
Analog VGA (RGB)
signal.
SETTING |
SIGNAL