Netgear DGFV338 DGFV338 Reference Manual - Page 142
IKE Policies, List of IKE Policies, Add IKE Policy, Mode Config, View selected
View all Netgear DGFV338 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual Figure 5-23 To configure an IKE Policy: 1. From the main menu, select VPN. The IKE Policies screen will display showing the current policies in the List of IKE Policies Table. 2. Click Add to configure a new IKE Policy. The Add IKE Policy screen will display. 3. Enable Mode Config by checking the Yes radio box and selecting the Mode Config record you just created from the pull-down menu. (You can view the parameters of the selected record by clicking the View selected radio box.) Mode Config works only in Aggressive Mode, and Aggressive Mode requires that both ends of the tunnel be defined by a FQDN. 5-34 v1.0, April 2007 Virtual Private Networking
DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
5-34
Virtual Private Networking
v1.0, April 2007
To configure an IKE Policy:
1.
From the main menu, select
VPN
. The
IKE Policies
screen will display showing the current
policies in the
List of IKE Policies
Table.
2.
Click
Add
to configure a new IKE Policy. The
Add IKE Policy
screen will display.
3.
Enable
Mode Config
by checking the
Yes
radio box and selecting the Mode Config record
you just created from the pull-down menu. (You can view the parameters of the selected record
by clicking the
View selected
radio box.)
Mode Config works only in Aggressive Mode, and Aggressive Mode requires that both ends
of the tunnel be defined by a FQDN.
Figure 5-23