Netgear DGFV338 DGFV338 Reference Manual - Page 46
Select the WAN Failure Detection Method, if Auto-Rollover is selected
View all Netgear DGFV338 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual Figure 2-9 3. Select your WAN port configuration: • Select the Auto-Rollover radio button and designate the rollover port from the pull-down menu. Auto-Rollover is available only if you have connected and configured both an ADSL ISP and an Ethernet ISP connection. • Select the Use Dedicated WAN port radio button and select the dedicated port from the pull-down menu if you have configured and are connected to only one port. 4. Select the WAN Failure Detection Method, if Auto-Rollover is selected: • Select DNS lookup using this DNS Server and enter the server address (default), or • Select the Ping to this IP address and enter the ping address. Once a rollover occurs, when the primary port is restored, the router will automatically switch back to the designated primary port. 2-16 v1.0, April 2007 Basic Installation and Configuration