Netgear DGFV338 DGFV338 Reference Manual - Page 150

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual Service Blocking Note: This feature is for Advanced Administrators only! Incorrect configuration will cause serious problems. You can control specific outbound traffic (i.e., from LAN to WAN and from DMZ to WAN). Outbound Services lists all existing rules for outbound traffic. If you have not defined any rules, only the default rule will be listed. The default rule allows all outgoing traffic. Each rule lets you specify the desired action for the connections covered by the rule: • BLOCK always • BLOCK by schedule, otherwise Allow • ALLOW always • ALLOW by schedule, otherwise Block As you define your firewall rules, you can further refine their application according to the following criteria: • LAN users. These settings determine which computers on your network are affected by this rule. Select the desired options: - Any: All PCs and devices on your LAN. - Single address: The rule will be applied to the address of a particular PC. - Address range: The rule is applied to a range of addresses. - Groups: The rule is applied to a Group. You use the Network Database to assign PCs to Groups (see "Groups and Hosts" on page 6-3). • WAN Users. These settings determine which Internet locations are covered by the rule, based on their IP address. - Any: The rule applies to all Internet IP address. - Single address: The rule applies to a single Internet IP address. - Address range: The rule is applied to a range of Internet IP addresses. • Services. You can specify the desired Services or applications to be covered by this rule. If the desired service or application does not appear in the list, you must define it using the Services menu (see "Services" on page 6-3). • Schedule. You can specify whether the rule is to be applied on the Schedule 1, Schedule 2, or Schedule 3 time schedule (see "Schedule" on page 6-3). 6-2 Router and Network Management v1.0, April 2007