Netgear DGFV338 DGFV338 Reference Manual - Page 68
Configuring WPA2 with RADIUS, Apply, Wireless Security Type, RADIUS, WPA
View all Netgear DGFV338 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual Figure 3-8 4. Click Apply to save your settings. Configuring WPA2 with RADIUS Not all wireless adapters support WPA2. Furthermore, client software is required on the client. Make sure your client card supports WPA2. Consult the product document for your wireless adapter and WPA2 client software for instructions on configuring WPA2 settings. To configure WPA2 with RADIUS: 1. In the Wireless Security Type section, select the WPA2 radio box. 2. Then select RADIUS from the WPA with pull down menu. By default, Data Encryption will be set to AES. 3. Enter the following RADIUS Server Settings: a. Enter the RADIUS Server Name or IP Address. This is the name or IP address of the primary RADIUS Server on your LAN (required field). b. Enter the RADIUS port number for connecting to the RADIUS Server. c. Enter the Shared Key. The value must match the value used on the RADIUS Server. 4. Click Apply to save your settings. 3-16 v1.0, April 2007 Wireless Configuration