Netgear DGN3500 DGN3500 User Manual - Page 28
Setup, Access List, Turn Access Control On, button. The Wireless Station Access List screen displays
UPC - 606449062311
View all Netgear DGN3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
RangeMax Wireless-N DSL Gigabit Modem Router DGN3500 User Manual 2. In the Wireless Settings screen, under the Wireless Station Access List section, click the Setup Access List button. The Wireless Station Access List screen displays: Figure 2-2 3. Select the Turn Access Control On check box to enable the restricting of wireless computers by their MAC addresses. 4. Specify which wireless computers you want to allow to access your wireless network. • If a computer is connected to the network, you can select it from the Available Wireless Stations list. • You can copy and paste the MAC addresses from the modem router's Attached Devices screen into the MAC Address field of this screen. To do this, configure each wireless computer to obtain a wireless link to the modem router. The computer should then appear in the Attached Devices screen. • If the computer is not connected, you can type in its MAC address. The MAC address is usually printed on the wireless device, or it might appear in the modem router's DHCP table. The MAC address is 12 hexadecimal digits. 2-9 Configuring Your Wireless Network and Security Settings v1.0, November 2009