Netgear DGN3500 DGN3500 User Manual - Page 72
Configuration Protocol DHCP and Routing Information Protocol RIP., LAN IP address
UPC - 606449062311
View all Netgear DGN3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
RangeMax Wireless-N DSL Gigabit Modem Router DGN3500 User Manual The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host Configuration Protocol (DHCP) and Routing Information Protocol (RIP). The modem router is shipped preconfigured to use private IP addresses on the LAN side and to act as a DHCP server. The modem router's default LAN IP configuration is: • LAN IP address: 192.168.0.1 • Subnet mask: 255.255.255.0 These addresses are part of the designated private address range for use in private networks and should be suitable for most applications. If your network has a requirement to use a different IP addressing scheme, you can make those changes in the LAN Setup screen. To configure LAN settings, log in to the modem router, and under the Advanced heading, select LAN Setup. The following screen displays: Figure 5-2 If you make changes you must click Apply in order for the changes to take effect. Note: If you change the LAN IP address of the modem router while connected through your Internet browser, you will be disconnected. You must then open a new connection to the new IP address and log in again. 5-4 Advanced Configuration v1.0, November 2009