Netgear GS752TS GS7xxTS-TPS Hardware Installation Guide - Page 8

GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch Hardware Installation Guide • 2 x SFP (slot) to support 1G optical module (uplink) or 2.5G stacking (via stacking cable). • GS728TPS/GS752TPS • 24/48 PoE-capable 10/100/1000 Mbps copper ports (8 PoE+ capable) • 2 x Combo ports to support 10/100/1000 Mbps copper ports or 1G/100M optical module. • 2 x SFP (slot) to support 1G optical module. • 2 x SFP (slot) to support 1G optical module (uplink) or 2.5G stacking (via stacking cable). • Stacking ports • GS728TS/GS728TPS: Port 27 and port 28 can be used as the stacking ports or as uplink ports. • GS752TS/GS752TPS: Port 51 and port 52 can be used as the stacking ports or as uplink ports. • Six 100/1000Mbps SFP slots and two 2.5Gbps ports for stacking. • Full NETGEAR Smart Switch functionality. • Stack will support up to a maximum of 6 switches. • Mix and match stacking supported on the GS7xxTS/GS7xxTPS family (GS728TS, GS752TS, GS728TPS and GS752TPS). • Full compatibility with IEEE standards: • IEEE 802.3i (10BASE-T) • IEEE 802.3u (100BASE-TX) • IEEE 802.3ab (1000BASE-T) • IEEE 802.3z (1000BASE-x) • IEEE802.3az (Energy Efficient Ethernet) • IEEE 802.3x (Full-duplex flow control) • IEEE802.3af (DTE Power via MDI) • IEEE802.3at (DTE Power via MDI Enhancements) • PoE • GS728TPS: Port 1-8 support both IEEE802.3 at and af, and port 9-24 support IEEE802.3af. • GS752TPS: Port 1-8 support both IEEE802.3 at and af, and port 9-48 support IEEE802.3af. • Autosensing and auto-negotiating capabilities for all ports. • Auto Uplink™ on all ports to make the right connection. • Automatic address learning function to build the packet-forwarding information table. The table contains up to 16K Media Access Control (MAC) addresses. • GS7xxTS Model LEDs: Port LED, Power and Status LED, FAN status LED and Master LED. 8 | Chapter 1. Introduction