Netgear RNRX4410 ReadyNAS 2100 User Manual - Page 100
Table 6-1., LED Descriptions, continued
UPC - 606449062137
View all Netgear RNRX4410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
ReadyNAS 2100 User Manual Table 6-1. LED Descriptions (continued) Item 5. SYS Reset Button. Activity Description Reset: Press once to do a warm boot of the ReadyNAS 2100. Diagnostics: To enter the diagnostic boot menu, press and hold while powering the unit on, and keep pressing until all LEDs except the Disk ACT are on Boot Menu Options Press the Backup button to toggle through these Boot Menu options. Once the LEDs indicate the desired boot menu option is selected, press SYS Reset again to confirm the selection, and initiate the option. Menu USB Code LED 1 Disk LED 2 3 Boot 4 Option 0 On On On On On Boot menu enabled 1 Off On Off Off Off Normal boot 2 Off Off On Off Off Factory default 3 Off Off Off On Off OS Reinstall 4 Off Off Off Off On Tech Support 5 On Off Off Off Off Skip Volume Check 6 On On Off Off Off Memory Test 7 On Off On Off Off Factory Test 6. Power Button. On (Blue) Blinking Off On: Power is supplied to the ReadyNAS 2100. Blink: The ReadyNAS 2100 is booting. It it continues blinking for more than 10 seconds, and no error code displays on the LEDs, the BIOS hung with an unknown error. When the unit is running the BIOS or boot loader, pressing the power switch once will power it off immediately. Preferred Shutdown: If the unit OS is running, pressing the power switch once will begin graceful shutdown blink pattern on the LEDs. Pressing the power button a second time confirms and initiates the graceful shutdown. Forced Shutdown: If the unit is hung, you can press and hold the power button for 5 seconds to force shutdown. Power is not supplied to the ReadyNAS 2100. Note: If all LEDs (including power LED) are blinking, pressing the power button will force a shutdown but doing nothing will let the system resume its operations. 6-4 Managing Levels of Service v1.0, May 2009