Netgear RNRX4410 ReadyNAS 2100 User Manual - Page 23
Speed/Duplex Mode Only applies to 10/100 connections, Teaming/Failover
UPC - 606449062137
View all Netgear RNRX4410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
ReadyNAS 2100 User Manual • Speed/Duplex Mode (Only applies to 10/100 connections). If you have a managed switch that works best if the devices are forced to a particular speed or duplex mode, you can select the setting you want. NETGEAR advises that you keep the setting in an Auto-negotiation mode otherwise. Figure 2-3 • MTU. In some network environments, changing the default MTU value can fix throughput problems. NETGEAR advises that you leave the default setting otherwise. Figure 2-4 Teaming/Failover In this section, you can select the desired bonding mode. If you plan to use the Teaming/Failover option, connect both interfaces, configure the Teaming/ Failover options on the Ethernet 1 tab page, then configure the other options for Ethernet 1 and Ethernet 2 accordingly. Note: If you plan to reserve an IP address in your DHCP server for the ReadyNAS and will use the Teaming/Failover option, complete the ReadyNAS bonding of the Ethernet interfaces before updating the DHCP server address reservation table. Setting Up and Managing Your ReadyNAS 2100 2-3 v1.0, May 2009