Netgear RNRX4410 ReadyNAS 2100 User Manual - Page 99
Control Panel Status and Diagnostic Information, Table 6-1., LED Descriptions - 100
UPC - 606449062137
View all Netgear RNRX4410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
ReadyNAS 2100 User Manual Control Panel Status and Diagnostic Information 1 Figure 6-4 2 3 4 56 The function of each Control Panel item is described in the following table: Table 6-1. LED Descriptions Item 1. Backup Button. 2. USB Status LED. 3. Disk LEDs. 4. LAN1 and LAN2 Ports. Activity Description Push button Backup: Push to initiate FrontView scheduled backup jobs. Diagnostics: Toggles between boot menu options (see SYS Reset below). Boot Sequence: Press to initiate boot from external USB. On (Green) Blinking (Green) Off On: A USB device is mounted. Blink: USB device dismounting or scheduled backup running. Off: USB device dismounted. See SYS Reset below for other boot codes. On (Green) On: Disk installed Blink (Green) Blink: Disk resynching or disk failure. "Marching" LEDs: volume expansion in progress. Off Off: No disk installed Diagnostics: • 1 & 2 stay on if boot memory test fails • 1 & 3 stay on if device not bootable • Alternating between all Disk LEDs on and only Disk 2 LED on means no disk detected. • Alternating between all Disk LEDs on and only Disks 1 & 2 LED on means boot failure, possible corrupted root. • See SYS Reset below for other boot codes. On (Green) The LAN port is operating at 1,000 Mbps. On (Amber) The LAN port is operating at 100 Mbps. Off The LAN port is operating at 10 Mbps. Managing Levels of Service 6-3 v1.0, May 2009