Netgear RNRX4410 ReadyNAS 2100 User Manual - Page 104
Using the System Diagnostic Menu, Use the OS REINSTALL Option to Re-install the Firmware
UPC - 606449062137
View all Netgear RNRX4410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
ReadyNAS 2100 User Manual Using the System Diagnostic Menu The recessed reset switch allows you to perform six functions (see the table "Control Panel Status and Diagnostic Information" on page 6-3): 1. Normal: Bypass the diagnostic menu and perform a normal boot. 2. Factory Default: Reset the ReadyNAS back to factory default state, erasing all data on the disks. This option can be used to change between X-RAID2 and Flex-RAID mode. Warning: This process reinstalls the firmware and resets all disk configurations, wiping out any data you might have on the NAS. 3. OS Reinstall: While keeping the data volume in tact, re-install the RAIDiator firmware on the ReadyNAS, reset the admin password and change the DHCP assignment to DHCP client. This is helpful if you have lost your admin password and want to set it back to default, if errors in your network settings has made it impossible to connect to the ReadyNAS, or if you suspect that the operating system on your disk may somehow be corrupt. Tip: If possible, use the configuration backup (see "Configuration Backup" on page 2-34) to save your configuration so that if you have to reset the unit to its factory default settings, you can simply restore all your settings from the configuration backup. 4. Tech Support: Enable the remote diagnostic function. 5. Skip Volume Check: Boot the system but bypass the volume check. 6. Memory Test: Perform a memory diagnostic. Typically, if you find that a configuration change makes the unit inaccessible, you can use option (3) to set the unit back to a factory default state. Use the OS REINSTALL Option to Re-install the Firmware To Re-install the RAIDiator firmware on the ReadyNAS without touching the data volume, follow these steps. 6-8 Managing Levels of Service v1.0, May 2009