Netgear WGR826V Reference Manual - Page 63

Business Group ID - Business Group Id of the customer, checked is in the received RTP packets.

Get Netgear WGR826V - 54 Mbps Wireless Router PDF manuals and user guides View all Netgear WGR826V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

Reference Manual for the 54 Mbps Wireless Router with Phone Adapter WGR826V - Digit Timer -This value in seconds indicates the Inter-digit timeout. When the customer does not dial expected number digits, the Router waits for this time after every digit dialed. - Critical Timer - This value in seconds indicates the last digit time-out. When the customer dialed the expect number of digits, the Router waits for this time for every digit dialed until the maximum number of digits dialed before it initiates connection setup. - Long Connect Timer- This value in seconds indicates the maximum time the Router can wait for the customer to dial digits before it initiates connection setup. - DTMF Relay State - This state indicates whether the dialed digits need to relayed through the server or not. If it is disabled, the digits are sent in-band with the speech. - DTMF Relay Payload - This value indicates the Payload value to be used in the RTP packets sent for DTMF relay. - DTMF Relay Repetitions - This value indicates the repetition rate to RTP packets sent for DTMF relay. - Receive Gain - This value in dB indicates the gain of speech to be played on the voice ports, received over the network. - Transmit Gain - This value in dB indicates the gain of speech sent out of the voice ports over the network. - RTP Packet Sequence Check - This parameter indicates whether sequence number to be checked is in the received RTP packets. - Subscribe Timer - This value indicates the interval at which SUBSCRIBE requests are sent to the server to get the voice mail notifications. - Jitter Control - This state indicates whether Jitter Control is enabled or not. It gives the minimum and maximum jitter queue lengths if Jitter Control is enabled. - Emergency Service # - Indicate the Telephone number(s) of Emergency service. • PORT-1: - Phone Number - Telephone number of port -1 - Display Name - Name of the customer - Business Group ID - Business Group Id of the customer - Password - Password used for digests sent in SIP REGISTER/ INVITE messages sent to the server Doing Basic Router Housekeeping 202-10051-01, March 2005 6-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
Reference Manual for the 54 Mbps Wireless Router with Phone Adapter WGR826V
Doing Basic Router Housekeeping
6-11
202-10051-01, March 2005
–
Digit Timer -This value in seconds indicates the Inter-digit timeout. When the customer
does not dial expected number digits, the Router waits for this time after every digit
dialed.
–
Critical Timer - This value in seconds indicates the last digit time-out. When the customer
dialed the expect number of digits, the Router waits for this time for every digit dialed
until the maximum number of digits dialed before it initiates connection setup.
–
Long Connect Timer- This value in seconds indicates the maximum time the Router can
wait for the customer to dial digits before it initiates connection setup.
–
DTMF Relay State - This state indicates whether the dialed digits need to relayed through
the server or not. If it is disabled, the digits are sent in-band with the speech.
–
DTMF Relay Payload - This value indicates the Payload value to be used in the RTP
packets sent for DTMF relay.
–
DTMF Relay Repetitions - This value indicates the repetition rate to RTP packets sent for
DTMF relay.
–
Receive Gain - This value in dB indicates the gain of speech to be played on the voice
ports, received over the network.
–
Transmit Gain - This value in dB indicates the gain of speech sent out of the voice ports
over the network.
–
RTP Packet Sequence Check - This parameter indicates whether sequence number to be
checked is in the received RTP packets.
–
Subscribe Timer - This value indicates the interval at which SUBSCRIBE requests are
sent to the server to get the voice mail notifications.
–
Jitter Control - This state indicates whether Jitter Control is enabled or not. It gives the
minimum and maximum jitter queue lengths if Jitter Control is enabled.
–
Emergency Service # - Indicate the Telephone number(s) of Emergency service.
•
PORT-1:
–
Phone Number - Telephone number of port -1
–
Display Name - Name of the customer
–
Business Group ID - Business Group Id of the customer
–
Password - Password used for digests sent in SIP REGISTER/ INVITE messages sent to
the server