Nikon S200 S200 User's Manual - Page 110

Playback Options: The Playback Menu z Slide Show Play back pictures stored in the internal memory or on a memory card in an automated "slide show". Slide show Pause: Start Frame intvl Loop Exit 1 Display the slide show menu; use the multi selector to choose [Start] and press d. To change the interval between pictures, choose [Frame intvl], select the desired interval time, and press d before choosing [Start]. Slide show Pause: Start Frame intvl Loop Exit To repeat the slide show automatically, enable [Loop] and press d before choosing [Start]. The check mark (y) will be added to the loop option when enabled. 2 The slide show begins. While the slide show is in progress, the following operations can be performed: • Press the multi selector to left or right to switch pictures. Keep the multi selector pressed to either direction to fast forward (right) or rewind (left). • Press d to pause the slide show. The menu shown at right is displayed when the slide show ends or is paused. Choose [Restart] and press d to play the slide show again, or choose [End] to stop the slide show and return to the playback menu. Pause Restart End Frame intvl Shooting, Playback, and Setup Menus j Notes on Slide Show • Only the first frame of movies (c 64) included in slide shows is displayed. • Even if [Loop] is selected, the monitor will turn off automatically if no operations are per- formed for 30 minutes. The camera will turn off automatically if no operations are per- 96 formed for another three minutes.