Nokia 002M1S1 E72 User Guide - Page 116
Network settings, Connection settings
UPC - 758478018279
View all Nokia 002M1S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Settings setting is only available if you have defined internet call service settings. • Reject call with message - Reject a call, and send a text message to the caller. • Message text - Write the standard text message that is sent when you reject a call. • Own video in recvd. call - Allow or deny video sending during a video call from your device. • Image in video call - Display a still image if video is not sent during a video call. • Automatic redial - Set your device to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt. To stop automatic redialling, press the end key. • Show call duration - Display the length of a call during the call. • Summary after call - Display the length of a call after the call. • Speed dialling - Activate speed dialling. • Anykey answer - Activate anykey answer. • Line in use - This setting (network service) is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network service, you are not able to make calls. When line 2 is selected, is displayed in the home screen. • Line change - Prevent line selection (network service), if supported by your SIM card. To change this setting, you need the PIN2 code. 116 • Noise cancellation - Activate earpiece active noise cancellation. • Contact search - Activate contact search in the home screen. Network settings Select Menu > Ctrl. panel > Settings and Phone > Network. To select the network mode, select Network mode and Dual mode, UMTS, or GSM. In dual mode, the device switches automatically between networks. Tip: Selecting UMTS enables faster data transfer, but may increase the demand on battery power and reduce the battery life. In regions close to both GSM and UMTS networks, selecting Dual mode may cause constant jumping between the two networks, which also increases the demand on battery power. To select the operator, select Operator selection and Manual to select from available networks, or Automatic to set the device to select the network automatically. To set the device to indicate when it is used in a microcellular network (MCN), select Cell info display > On. Connection settings Select Menu > Ctrl. panel > Settings and Connection. Select from the following: • Bluetooth - Edit the Bluetooth settings. • USB - Edit the data cable settings. • Destinations - Set up new or edit existing access points. Some or all access points may be preset for your