Nokia 002M1S1 E72 User Guide - Page 119
WLAN internet access points, Packet data (GPRS) settings
UPC - 758478018279
View all Nokia 002M1S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Settings • Phone IP address (for IPv4 only) - Enter the IP address of your device. • DNS addresses - Enter the IP addresses of the primary and secondary DNS servers, if required by your service provider. To obtain these addresses, contact your internet service provider. • Proxy server address - Enter the address of the proxy server. • Proxy port number - Enter the port number of the proxy server. Open network, no encryption is used. The WEP, 802.1x, and WPA functions can be used only if the network supports them. • Use access point - Select After confirmation to set the device to ask for confirmation before the connection using this access point is created or Automatically to set the device to connect to the destination using this access point automatically. To enter the settings for the selected security mode, select WLAN security settings. WLAN internet access points Advanced WLAN settings Select Menu > Ctrl. panel > Settings and Connection > Select Options > Advanced settings and from the Destinations > Access point, and follow the instructions following: on the display. Or, open one of the access point groups, • IPv4 settings - Enter the IP address of your device, select an access point marked with , and select Options > Edit. the subnet IP address, the default gateway, and the IP addresses of the primary and secondary DNS servers. Use the instructions provided by your service provider to edit the following: • WLAN network name - Select Enter manually or Search for networks. If you select an existing network, WLAN network mode and WLAN security mode are determined by the settings of its access point device. • Network status - Define whether the network name is displayed. • WLAN network mode - Select Ad-hoc to create an Contact your internet service provider for these addresses. • IPv6 settings - Define the type of DNS address. • Ad-hoc channel (only for ad hoc networks) - To enter a channel number (1-11) manually, select User defined. • Proxy server address - Enter the address for the proxy server. • Proxy port number - Enter the proxy port number. ad hoc network, and to allow devices to send and receive data directly; a WLAN access point device is not needed. In an ad hoc network, all devices must use the same WLAN network name. • WLAN security mode - Select the encryption used: Packet data (GPRS) settings Select Menu > Ctrl. panel > Settings and Connection > Packet data. WEP, 802.1x, orWPA/WPA2. (802.1x and WPA/WPA2 are not available for ad hoc networks.) If you select Your device supports packet data connections, such as GPRS in the GSM network. When you are using your device 119