Nokia IP2255 Installation Guide - Page 77
Reboot the appliance., If you used Network Voyager to halt the system, push the reset button
View all Nokia IP2255 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Removing, Installing, and Replacing the Nokia Encryption Accelerator Card 7. Gently pull the NIC out from the slot and place it on a suitable, grounded work surface. 10Base-SR X2 A L SLOT 1 A 10Base-SR X2 L RESET CONSOLE A L SLOT 2 PCMCIA 10/100BaseT SLOT 3 1 10/100BaseT 2 1 1 2 SLOT 10/100/1000BaseT 2 4 3 5 4 3 6 5 4 6 SLOT 5 7 1 L 3 A 5 7 8 L A 7 L A 8 L A 5 7 IP2255 1 2 3 4 00305 8. Insert the new or replacement Nokia encryption accelerator card into the empty slot on the front of the appliance until it clicks into place. Note If you remove a NIC and do not install a new one, make sure you install a cover plate onto the front of the empty slot formerly occupied by the NIC you removed. The cover plate is required for the IP2255 appliances to meet emissions requirements during operation. 9. Reboot the appliance. If you used Network Voyager to halt the system, push the reset button on the front panel of the security platform. If you used the CLI to halt the system, press any key to reboot. Nokia IP2255 Security Platform Installation Guide 77