Home » Nokia Manuals » Network Security & Firewall Devices » Nokia IP2255 » Manual Viewer

Nokia IP2255 Installation Guide - Page 97

To replace a fan unit, Loosen the screws by turning them counterclockwise.

Add to My Manuals
Save this manual to your list of manuals

Page 97 highlights

Replacing the Fan Unit Caution Components inside the IP2255 appliance can overheat if they are not cooled even for a short time. If you are replacing a failed fan unit and do not completely remove power to the appliance, do not allow the appliance to run without a fan unit for any longer than necessary. The fan unit is hot swappable, which means you can remove and install the fan unit on the front of the appliance without shutting down the device. To replace a fan unit 1. Locate the fan unit on the front of the appliance and the two retaining screws that secure it to the chassis. 2. Loosen the screws by turning them counterclockwise. 3. Slowly pull the fan unit out of the chassis toward the front. Retaining screws 10Base-SR X2 SLOT 1 A 10Base-SR X2 L RESET CONSOLE A L SLOT 2 AUX 00081 4. If the appliance is running, immediately install a replacement fan unit by sliding it into the security platform. Nokia IP2255 Security Platform Installation Guide 97

Section	Page
Title Page	1
Contact Information	3
Contents	5
Tables	9
Figures	11
About this Guide	13
In this Guide	13
Conventions this Guide Uses	14
Notices	14
Text Conventions	15
Related Documentation	16
1 Overview	19
About the Nokia IP2255 Security Platform	19
Managing the Nokia IP2255 Appliance	20
Nokia IP2255 Appliance Overview	21
Ethernet Management Ports	23
Nokia Network Interface Cards	24
Console Port	26
Serial Port	27
System Status LEDs	29
Fan Unit	30
Storage Devices	31
Power Supplies	31
Product Disposal	32
Site Requirements, Warnings, and Cautions	33
Software Requirements	34
2 Installing Nokia IP2255 Appliances	37
Rack Mounting the Security Platform	37
Before You Begin	38
3 Performing the Initial Configuration	45
Using a Console Connection	46
Connecting Power and Turning the Power On	47
Performing the Initial Configuration	50
Connecting Network Interfaces	52
Using Nokia Network Voyager	53
Viewing Nokia IPSO Documentation by Using Nokia Network Voyager	54
Using the Command-Line Interface	55
Using Nokia Horizon Manager	57
4 Connecting to the Network Interface Cards	59
Eight-Port 10/100 Ethernet NIC	60
10/100 Ethernet NIC Features	60
10/100 Ethernet NIC Connectors and Cables	61
Two-Port and Four-Port Copper Gigabit Ethernet NIC	64
Copper Gigabit Ethernet NIC Features	64
Copper Gigabit Ethernet NIC Connectors and Cables	65
Two-Port and Four-Port Fiber-Optic Gigabit Ethernet NIC	67
Fiber-Optic Gigabit Ethernet NIC Features	67
Fiber-Optic Gigabit Ethernet NIC Connectors and Cables	68
Single-Port Fiber-Optic 10 Gigabit Ethernet NIC	69
Fiber-Optic 10 Gigabit Ethernet NIC Features	69
Fiber-Optic 10 Gigabit Ethernet NIC Connectors and Cables	70
5 Installing, Replacing, and Configuring the Nokia Encryption Accelerator Card	73
Removing, Installing, and Replacing the Nokia Encryption Accelerator Card	74
Before you Begin	74
Configuring and Activating Encryption Acceleration	78
6 Installing and Replacing Network Interface Cards	79
Removing, Installing, and Replacing NICs	80
Before You Begin	81
Configuring and Activating Interfaces	84
Monitoring NICs	84
7 Installing and Replacing Other Components	85
Replacing the Compact-Flash Memory Card	86
Replacing the Memory	91
Replacing the Fan Unit	96
Replacing a Power Supply	98
Replacing the Management NIC	100
8 Troubleshooting	105
General Troubleshooting Information	105
A Technical Specifications	113
Space Requirements	113
B Compliance Information	115
Declaration of Conformity	115
Compliance Statements	117
FCC Notice (US)	118
Index	121
Numerics	121
A	121
C	121
D	121
E	122
F	122
H	122
I	122
L	122
M	122
N	122
O	123
P	123
R	123
S	123
T	124