Oki C942 C911dn/C931dn/C931DP/C941dn/C941DP/C942 Troubleshooting Guide - Engli - Page 39

If replace consumables messages are displayed Category Message displayed on the liquid crystal panel Error code lamp Causes and Troubleshooting Reference pages Troubleshooting Image Drum Install [COLOR] New Image Drum 6800 Printing disabled due to low 6801 Blinking The lifespan of the image drum has been reached. page 66 1 threshold of Image Drum life 6802 You cannot continue printing. Please see HELP for details 6803 Press the [HELP] button, and 6804 solve according to the guidance 6805 shown on the Help screen. Check Image Drum 3400 Blinking Image drum shown in the - [COLOR] 3401 message has not been set Please see HELP for details 3402 correctly. 3403 3404 Press the [HELP] button, and solve according to the guidance 2 3405 shown on the Help screen. Maintenance Waste Install New Waste Toner Box 357 Toner Box Waste Toner Full Please see HELP for details Blinking Waste toner is full. If you re-set and use a waste toner box that is already used, there is a risk of the waste toner overflowing, so please replace it with a new waste toner box. Press the [HELP] button, and solve according to the guidance shown on the Help screen. page 77 Index Fuser Unit Install New Fuser Unit Fuser Unit Life Please see HELP for details 354 Blinking Lifespan of the fuser unit has page 75 reached Press the [HELP] button, and solve according to the guidance shown on the Help screen. Belt Unit Install New Belt Unit Belt Unit Life Please see HELP for details 355 Blinking Lifespan of the belt unit and page 69 the transfer roller unit has been reached. Press the [HELP] button, and solve according to the guidance shown on the Help screen. - Caution, unknown Consumable 709 Blinking You can use any consumables - detected in your product, but you must Go to User Manual "Trouble accept the risks of using non- Shooting" to restore operation genuine consumables. If the use of non-genuine consumables causes damage to the product or results in your product not functioning to its full specification, then such damage or effect on the product is not covered by warranty. To accept these risks and to restore function; 1. Turn off your product. 2. Press and hold the [CANCEL] button and turn your product on. 3. After start up, release the [CANCEL] button. Note This operation will be recorded for future reference. - 39 -