Oki C942 C911dn/C931dn/C931DP/C941dn/C941DP/C942 Troubleshooting Guide - Engli - Page 87
Device Maintenance, Cleaning device surfaces, Cleaning LED heads
View all Oki C942 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Device Maintenance zzDevice Maintenance This section describes the cleaning method of the respective part of the device. 1 Troubleshooting Cleaning device surfaces Cleaning LED heads Items to be prepared: Water or neutral washing agent, soft and dry cotton cloth 2 pieces Note zz Do not use Benzene or thinner as it may damage plastic parts and coating. zz Only use water or neutral washing agent. zz It is not necessary to oil the device. Do not oil it. 1 Press and hold the power switch for approximately 1s to switch off the power supply. Clean LED head when there are stripes or white creases on the print, or when letters are blurred. Clean LED head when there is vertical white line on the output paper or when the images 2 disappear vertically, or when the border of the letters is blurred. When LED head is unclean, it may cause paper jam. Maintenance Note zz Do not use methyl alcohol or thinner. It may damage the LED head. zz Do not expose the image drum to direct sunlight or strong light (About 1,500 lux or more). Do not keep it for more than 5 minutes even under room lighting. Items to be prepared: Soft tissue paper Index 1 Press and hold the power switch for approximately 1s to switch off the power supply. 2 Check that the operation panel is completely turned off, and then switch off the main power supply. 2 Check that the operation panel is completely turned off, and then switch off the main power supply. 3 Take water or neutral washing agent on one piece of cotton cloth, and wipe with thoroughly squeezed cloth. Furthermore, wipe off with another dry cotton cloth. \ - 87 -