Oki C942 C911dn/C931dn/C931DP/C941dn/C941DP/C942 Troubleshooting Guide - Engli - Page 43
Message Data Write Error <[CODE]>, Press OK to change the Spot Color
View all Oki C942 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
If other messages are displayed Message displayed on the liquid crystal panel Error code lamp Causes and Troubleshooting Reference pages Check Fuser Unit 348 Blinking The fuser unit is not installed 320 correctly. - 1 Please see HELP for details Install the fuser unit correctly. Troubleshooting Receiving Data Timeout 519 Blinking A data receipt timeout occurred. [Advanced] > Press OK Button for Restoration Increase the length of timeout print [List of Setting Please see HELP for details setting. Items of the Device Settings Screen] > [Timeout Printing] 2 Check Data - Message Data Write Error - Failed to write the message data to - be updated. Check data. Maintenance Install Transfer Roller Unit 334 Blinking The transfer roller unit is not set - Re-set the transfer roller unit correctly. Please see HELP for details Press the [HELP] button, and solve according to the guidance shown on the Help screen. Index A spot color printing error has 459 Blinking Because of a print request for paper - occurred. Data will be erased unavailable to spot color printing, the Check the paper and paper printing has been stopped, and the settings, then print again. To turn data was deleted. off the display, press OK Check the paper and paper settings, Please see HELP for details and print again. Press the [OK] button for deleting the display of the liquid crystal panel. The data will be deleted due to an 458 Blinking Spot Color over printing is specified, - overprint feature error but the 2-Sided Printing unit is not Mount the duplex printing unit there. Printing was stopped and the and print again. To turn off the print data was deleted. display, press OK Install the 2-Sided Printing unit and Please see HELP for details print once again. Press the [OK] button for deleting the display of the liquid crystal panel. (C941/ES9541/Pro9541 only) The data will be deleted due to an 456 Blinking Paper used for printing is not - overprint feature error compatible for Spot Color over Check the paper and paper printing. Printing was stopped and settings, then print again. To turn the print data was deleted. off the display, press OK Change the paper, or set to Normal Please see HELP for details and print once again. Press the [OK] button for deleting the display of the liquid crystal panel. (C941/ES9541/Pro9541 only) Spot Color has been replaced 679 Blinking Spot Color has been exchanged - Press OK to change the Spot Color Solve according to the message. settings in the menu to [COLOR] (C941/ES9541/Pro9541 only) and restart the system If you do not want to change settings, return Spot Color toner, image drum and Spot Color duct settings to [MENUCOLOR]. Spot Color has been replaced 678 Blinking Spot Color has been exchanged - Check Spot Color menu settings Solve according to the message. Current setting is [MENUCOLOR] (C941/ES9541/Pro9541 only) Press OK Button Spot Color settings changes 677 Blinking Spot Color setting has been - Shut down and restart to enable changed. new settings Solve according to the message. (C941/ES9541/Pro9541 only) - 43 -