Oki C942 C911dn/C931dn/C931DP/C941dn/C941DP/C942 Advanced Users Guide - Englis - Page 122

Convenient print functions Matching Colors Using Utility Software Network Setup Matching colors using the control panel Watermark adjustment for density compensation 1 You can adjust the watermarks for the density based on the density compensation. Adjust each color separately for the parts where 2 the density is a nuisance from the print results. This section explains the procedure for adjusting the cyan watermarks. Use the same adjustment procedure also for other colors that you wish to adjust. 3 zzIncreasing cyan after checking the print results 1 Press the [Fn] key. The numerical values input screen will 4 be displayed. 3 Specify a larger value than the current value, and press the [OK] button. Memo zz To increase the density, select +1 to +3, and to decrease the density select -1 to -3. 4 Press the [ON LINE] button to return to the standby screen. 5 2 Press [3], [1], [0], and press the [OK] button. 5 Press the [Fn] key, [3], [0], [0], and press the [OK] button. Memo zz The procedures for adjusting magenta, yellow, and black are described below. -- To adjust magenta, press the [Fn] key, [3], [1], [1], and [OK] buttons. -- To adjust yellow, press the [Fn] key, [3], [1], [2], and [OK] buttons. -- To adjust black, press the [Fn] key, [3], [1], [3], and [OK] buttons. 6 Check that [Execute] has been selected, and press the [OK] button. Checking and Changing Printer Settings Using the Control Panel Appendix Index - 122 -