Oki C942 C911dn/C931dn/C931DP/C941dn/C941DP/C942 Advanced Users Guide - Englis - Page 246

Convenient print functions Matching Colors Using Utility Software Setting the network from the web browser Using the access restriction function (IP 1 filter) with IP addresses You can manage access to the device using the IP address. 2 Note zz The default device settings to [Disable] the [IP Filtering]. zz If the IP address is entered incorrectly, access to the device using IP protocols will be disabled. Be very careful during setup. 3 1 Log in as an administrator. Reference zz See "Logging in as an administrator" (P.230). 4 2 Click [Admin Setup]>[Network Setup]>[Security] tab. 5 3 Click [IP Filtering]. 4 [Enable] the [IP Filtering] in [STEP1]. Note zz [Enable] IP filtering to disable all access from IP address hosts outside the range set in [STEP2]. 5 Set the IP address range in [STEP2]. Note zz Use the IP address to enter the range that authorizes the printing and setup. zz For the IP address, use single-byte numbers separated by "." zz Disabled if the IP address entered is 0.0.0.0. zz If IP address ranges overlap, the settings for the address range with the highest [Priority] will be prioritized. zz Regardless of the specifications in Step 2, the administrator addresses that can be printed and set can be set in Step 3. 6 Click the [Address Range Bar Display/ Refresh]. Network Setup Checking and Changing Printer Settings Using the Control Panel Appendix Index To correct the IP address range, reenter the relevant IP address, and click the [Address Range Bar Display/Refresh] again. - 246 -