Oki C942 C911dn/C931dn/C931DP/C941dn/C941DP/C942 Advanced Users Guide - Englis - Page 47

Funciones de impresión útiles Concordar los colores Utilización de software de utilidades 7 Click the [Paper] button in the [Print Options] panel, and select [Stacker (Face-up)] from [Output Bin]. 8 Click [Print] to print. Printing on various papers Printing on user-selected paper sizes (custom pages and lengthy printing) 1 Register the desired paper size in the printer driver, and specify when printing. [Sizes that can be fed from the Multi- 2 Purpose Tray (Settable custom sizes)] Width: 64 to 330mm Length: 89 to 1321mm [Sizes that can be fed from the Multi- Purpose Tray] 3 Trays 1/2/3/4/5 Width: 99 to 330mm Length: 147 to 457mm [Sizes where 2-sided printing is possible] Width: 99 to 330mm 4 Length: 147 to 483mm Note zz If printing smaller paper than width 99mm and length 147mm, feed from the Multi-Purpose Tray and output to the face-up stacker. 5 zz Set the paper size to portrait length, and set in the device. zz Not usable with some applications. zz If feeding from the Multi-Purpose Tray, support the paper manually for paper lengths that are not fully supported by the paper supporter. Apéndice zz If feeding from the paper trays (tray 1, (optional) trays 2 to 5), press the scroll buttons or on the device control panel, and select [Menu]>[Tray Configuration]>[Set Tray 1]>[Paper Size]>[Custom]. Índice zz If there is no paper in the tray, setting the function to switch automatically to a tray in which paper of the same size has been set, the default settings will be enabled (i.e., the check box will be enabled). If the paper runs out during printing, paper will feed from another tray. Disable (i.e., uncheck) the check box when printing custom size paper from a designated tray only. Config de red Comprobar y cambiar la configuración de la impresora utilizando el panel de control - 47 -