Panasonic 72 Service Manual - Page 40

Assembling the Antenna Cover, the Tablet Latch Cover and the LCD Rear Case

Get Panasonic 72 - Toughbook - PIII 700 MHz PDF manuals and user guides
UPC - 092281808376
View all Panasonic 72 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

9.2.5. Assembling the Antenna Cover, the Tablet Latch Cover and the LCD Rear Case 1. Fix the LCD Rear Case using the 10 Screws and the 2 Screws. 2. Attach the Antenna Covers and the Tablet Latch Cover to the Display Unit. 3. Tighten the 8 Screws on the back of the Display Unit. LCD Rear Case 4. Turn the Display Unit over, and tighten the 8 Screws. Screws : DRQT26+E5FKL Screws : DXYN2+J6FNL Screws : DXYN3+J10FNL Antenna Cover ■ Assembly of LCD Front Case Do not use if the protrusion such as painting lump exists around D5. (Due to affect the Touch Screen operations.) Tablet Latch Cover Antenna Cover Insert it between the ribs, and attach it. LCD Front Assy Avoid running over Magnet Ass'y Magnet Tape 0 1mm 0 0.5mm Magnet 1mm (Both on the top and the side) Avoid running over Tape Note for attachment Avoid running over the display part. Attach and apply the load 30 to 40N (3.0 to 4.0 Kgf). Attach here Position of pasting D. 0 0.5mm 0 0.5mm Fit to the rib 0 0.5mm

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
9.2.5.
Assembling the Antenna Cover, the Tablet Latch Cover and the LCD Rear Case
1.FixtheLCDRearCaseusingthe10Screws<N15>and
the2Screws.<N16>
2.AttachtheAntennaCoversandtheTabletLatchCoverto
theDisplayUnit.
3.Tightenthe8Screws<N7>onthebackoftheDisplay
Unit.
4.TurntheDisplayUnitover,andtightenthe8Screws.
<N7>
Screws<N7>:DRQT26+E5FKL
Screws<N15>:DXYN2+J6FNL
Screws<N16>:DXYN3+J10FNL
■
Assembly of LCD Front Case
<N15>
<N15>
<N15>
<N15>
<N15>
<N16>
<N16>
<N15>
<N15>
<N15>
<N15>
<N15>
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
AntennaCover
TabletLatchCover
LCDRearCase
AntennaCover
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
Magnet
MagnetTape
LCDFrontAssy
Tape
MagnetAss'y
0 1mm
0 0.5mm
0 0.5mm
0 0.5mm
0 0.5mm
Insertitbetweentheribs,andattachit.
1mm(Bothonthetopandtheside)
Avoidrunningover
Avoidrunningover
Fittotherib
AttachherePositionofpastingD.
Attachandapplytheload30to40N(3.0to4.0Kgf).
Avoidrunningoverthedisplaypart.
Noteforattachment
DonotuseiftheprotrusionsuchaspaintinglumpexistsaroundD5.
(DuetoaffecttheTouchScreenoperations.)
40 / 90