Panasonic 72 Service Manual - Page 46

■ Assembly of the Pad PCB and SW PCB (Note) Arrow without specified measurement: 0 to 0.5 mm PAD PWB ASSY PAD PWB SW FPC Insert PAD MAIN FPC ASSY No direction when inserting Back side LED(R) FPC Insert Power SW Cable Power Cable Cushion Insert Use the fixing JIG for the pressured portion when the cables are inserted. Wrap around the Cable. Thermistor Insert to the connector 8 2mm PAD MAIN FPC Ass'y PAD-Main FPC Stiffening Plate Side Fold back 0 1mm Tape 0 1mm SW PCB Ass'y Operation Tape Match the edge and attach it. Ensure that the direction is right when attaching. The Connector bracket is on the back side. Avoid coming off of the LED part, or running over the LED part. SW PCB Operation Sheet ■ Putting of the TP Bottom Tape Front side SW PCB Ass'y Match to the upper left corner. 0 to 0.5mm Screw Screw 9.2.8. Setting the left LED PCB and right LED PCB 1. Connect the Cable to the Connector. (CN806) 2. Fix the left LED PCB. 3. Connect the Cable to the Connector. (CN801) 4. Fix the right LED PCB. 5. Attach the two Release Papers. 6. Attach the Palm Rest Ass'y. Release Paper left LED PCB Release Paper Connector(CN806) right LED PCB Connector(CN801)