Home » Panasonic Manuals » Webcams » Panasonic BL-C10A » Manual Viewer

Panasonic BL-C10A Network Camera - Page 16

Setting Home Position/Sensor Position/Preset Button, Registering Home Position/Sensor Position

UPC - 037988809738

Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Operating Instructions 1.2.4 Setting Home Position/Sensor Position/Preset Button The home position, sensor position and 8 preset buttons can be registered. Preset buttons (1-4) are registered 1: Upper Left, 2: Upper Right, 3: Lower Left and 4: Lower Right. These buttons can be changed (see page 19). • Registered buttons are shown in blue. • Unregistered buttons are shown in white. When clicking each button, the image switches to the home/sensor/preset position. When restarted, the camera takes a home position. If the Lens Position When Triggered setting is set (see page 59), the camera takes a sensor position after the pyroelectric infrared sensor detects temperature differences. Registering Home Position/Sensor Position 1. Click [Program]. • [Program] switches to [Cancel]. Home Click [Cancel] to quit without saving Position changes. 2. Pan and tilt the camera to a desired Pan/Tilt position. 3. Click the home position button or the Program sensor position button. 4. Click [Save]. • The bar switches to the operation bar. Sensor • Clicking [Back] takes you back to Position the previous page. 16

Section	Page
Main Features	2
Table of Contents	6
1 Camera Monitoring 8	6
2 Various Camera Features 26	6
3 Camera Maintenance 71	7
Index 101	7
1 Camera Monitoring	8
1.1 Accessing the Camera	8
1.2 Viewing Single Camera page	10
1.2.1 Bringing the Clicked Point to Center (Crick to Center)	12
1.2.2 Capturing a Still Image	13
1.2.3 Using Operation Bar	14
1.2.4 Setting Home Position/Sensor Position/Preset Button	16
1.3 Viewing Multi-Camera page	20
1.4 Viewing Buffered Image page	22
1.4.1 Deleting Buffered Images	23
1.5 Viewing Still Images on Your Mobile Phone	24
2 Various Camera Features	26
2.1 Using Camera Features	26
2.2 Connecting the Camera to Your Network	28
2.3 Using UPnP (Universal Plug and Play)	32
2.4 Registering with the Viewnetcam.com service	33
2.5 Setting Date and Time	35
2.6 Changing Camera Settings	37
2.7 Changing Authentication Setting and Administrator User Name and Password	41
2.8 Logging in to the Camera	44
2.9 Creating, Modifying or Deleting General Users	45
2.10 Changing Initial Settings on the Single Camera page or the Multi-Camera page	47
2.11 Configuring Multiple Cameras	49
2.12 Buffering or Transferring Images by Timer	51
2.13 Buffering or Transferring Images by Sensor	58
2.14 Specifying Operation Time	67
2.15 Changing Indicator Display	69
2.16 Enabling Privacy Mode	70
3 Camera Maintenance	71
3.1 Maintenance page	71
3.1.1 Confirming the Status	72
3.1.2 Restarting the Camera	72
3.1.3 Updating the Camera Firmware	73
3.1.4 Creating Configuration File	76
3.1.5 Loading Settings from a Configuration File	77
3.1.6 Resetting the Camera to Factory Default	78
3.2 Support page	79
3.2.1 Seeing Help page	79
3.2.2 Seeing Product Information	79
3.2.3 Seeing Support Information	80
3.3 FACTORY DEFAULT RESET Button	81
3.4 Default Setting List	82
3.5 Cleaning	88
3.5.1 Cleaning the Main Unit	88
3.5.2 Cleaning the Lens	88
3.6 Setting an IP Address on Your PC	89
3.7 Using Setup Program	90
3.8 Setting Your PC	92
3.8.1 Setting the Proxy Server Settings on Web Browser	92
3.8.2 Setting UPnP to Display Camera Shortcut in My Network Places	95
3.8.3 Setting the Internet Temporary File Setting on Web Browser	95
3.9 ASCII Character Table	96
3.10 File Size and Number of Buffered Images	97
3.11 Specifications	98
Index	101
A	102
B	102
C	102
D	102
F	102
G	102
H	102
I	102
L	102
M	102
N	102
O	102
P	102
R	102
S	102
T	102
U	103
V	103