Panasonic BL-C10A Network Camera - Page 28
Connecting the Camera to Your Network, Normally sets Automatic Setup., Uses a static IP address. - default ip address
UPC - 037988809738
View all Panasonic BL-C10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Operating Instructions 2.2 Connecting the Camera to Your Network The Network page offers three options to configure the camera. • [Automatic Setup] automatically assigns an unused IP address to the camera, and uses UPnP (Universal Plug and Play) to configure your router. • [Static] allows the user to use a specific IP address. • [DHCP] is offered for ISPs who require this option. 1. Click [Network] on the Setup page. 2. Select a connection mode. Normally sets Automatic Setup. Uses a static IP address. Uses ISP DHCP server function. • Each page is displayed (see page 28-page 29). 3. Enter each parameter in the proper data field. Automatic Setup The camera automatically obtains the network settings (subnet mask, default gateway and DNS server address) utilizing a DHCP feature on the router. The camera also automatically searches the unused IP address on your network. If you select [Yes] at the Allow Access from the Internet, the camera automatically enables port forwarding by using UPnP. In this case, the camera automatically searches the unused port number on your network in the order from 50000 to 50050. • Clicking [Cancel] takes you back to the previous page without saving changes. 28