Panasonic KXFPG377 KXFPG376 User Guide - Page 15

Replacing the ink film

Page 15 highlights

L Make sure that the ink film is wrapped around the blue core (3) at least once. Correct 3 Incorrect 1 turn Tight The ink film is not wrapped around the blue core. 1. Introduction and Installation 1.6.2 Replacing the ink film The included film roll is a starter ink film. To ensure that the unit operates properly, we recommend the use of Panasonic replacement film. See page 9 for accessory information. L We cannot be responsible for any damage to the unit or degradation of print quality which may occur from the use of non-Panasonic replacement film. 1 Open the covers (see steps 1 to 3 on page 12). 2 Pull out the blue gear (1) and remove the used ink film (2). Remove the used core (3). 3 Slack/Crease Reverse 6 First close the back cover securely (1) by pushing down on the dotted area on both sides (2). Then close the front cover securely (3). 2 1 3 2 1 3 Remove the stoppers (1) and tags (2) from the new ink film (3). 2 1 3 1 4 Insert the ink film and close the covers (see steps 4 to 6 on page 12). For Fax Advantage assistance, call 1-800-435-7329. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94

1. Introduction and Installation
13
For Fax Advantage assistance, call 1-800-435-7329.
L
Make sure that the ink film is wrapped
around the blue core (
3
) at least once.
6
First close the back cover securely (
1
) by
pushing down on the dotted area on both
sides (
2
). Then close the front cover
securely (
3
).
1.6.2 Replacing the ink film
The included film roll is a starter ink film. To
ensure that the unit operates properly, we
recommend the use of Panasonic replacement
film. See page 9 for accessory information.
L
We cannot be responsible for any damage to
the unit or degradation of print quality which
may occur from the use of non-Panasonic
replacement film.
1
Open the covers (see steps 1 to 3 on page
12).
2
Pull out the blue gear (
1
) and remove the
used ink film (
2
). Remove the used core
(
3
).
3
Remove the stoppers (
1
) and tags (
2
) from
the new ink film (
3
).
4
Insert the ink film and close the covers (see
steps 4 to 6 on page 12).
Correct
Tight
1 turn
Slack/Crease
Reverse
Incorrect
The ink film is not wrapped around the
blue core.
3
2
1
3
1
2
3
1
1
3
2