Pentax 645 645 Manual - Page 21
S0dX3
View all Pentax 645 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
`3 S0dX3 11111; 3. Draw the leader from the film roll, and insert the leader end into the take-up spool's slit. exposed, remove the film holder from the camera, following the attaching/detaching instructions. Slowly rotate the film winding gear by one • The built-in motor drive unit automatically stops turn in the direction of the arrow. as soon as the last frame is exposed and wound 4. Wind the leader paper upon the take-up spool onto the take-up spool. Then the LCD exposure until the arrow marking on the leader appears; counter displays the number which is the total it should be aligned with the holder's start exposure number of the film in use, plus one. mark S (red line). For example, 16 in the case of 120 film. • Care must be taken so that the leader paper's 5. Take the film holder out, and you will see arrow marking does not go far beyond the the exposed film wound on the take-up spool. holder's red dot, for you may lose the last frame(s) 6. While firmly holding the wound film roll, on the roll. Then attach the holder to the camera remove it after pushing the spool retainer body according to the holder attaching/detaching out. Using the paper seal on the back of instructions. Refer to p. 20 - 43 for shooting. the paper leader, securely paste to prevent After all of the frames on the roll have been accidental unwinding of the exposed roll. 19