Pentax 645 645 Manual - Page 37
Pentax 645 Manual
View all Pentax 645 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2 :f fi r 2. After turning on the main switch, a slight depressing upon the shutter release will reveal in the viewfinderLED the shutter speed and f/stop automatically programmed by the camera circuit. Additional pressure will release the shutter, enabling photographing. Visual warnings during Programmed AE control: While utilizing this mode, and should the shutter speed and f/stop combination fall beyond the meter coupling range, the LED in the viewfinder will display the following indications; attempting to photograph the subject under these situations will result in an improper exposure. facia' I = 12e F22 (flow-like flickering) In this particular instance, the subject brightness is over the maximum range, or the given situation exceeds the meter coupling range of the Programmed AE mode. It may be remedied by either using a slower speed film or employing an ND filter available on the market. -F= ps E (flow-like flickering) In this instance, the subject's brightness is extremely low, beyond the meter coupling range of the Programmed AE mode. It may be corrected through the use of a higher speed film, or by supplementing with a flash/other artificial lighting unit(s). 35