Pentax 645 645 Manual - Page 22

Switch, Switch, Shutter, Release, Button

Page 22 highlights

C/S SWITCH, MAIN SWITCH AND SHUTTER RELEASE BUTTON Lo2J IN • 000 The Pentax 645 incorporates a motor drive unit, permitting either single or consecutive shooting through the C/S switch. Select either the C or S position by turning the C/S switch. • Single frame shooting (S) By depressing the shutter release button, a single frame is exposed and automatically wound to the next frame, at which point the motor halts. • Consecutive shooting (C) While the shutter release button is kept depressed, the frames are continuously exposed at about 1.5 frames/sec. Once finger pressure is released from the shutter release button, the motor will halt after winding the film to the next frame. 20 • Main switch and shutter release button A light pressure upon the shutter release button with the main switch turned ON will immediately activate the exposure meter causing the LED indicator to appear in the viewfinder of the camera; further pressure on the button will release the shutter. A timer switch has also been integrated into the exposure meter circuit, and will automatically terminate power approximately 30 seconds after finger is removed from the release button. • Turning the main switch off during exposure will result in incorrect exposure.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75

C/S
SWITCH,
MAIN
SWITCH
AND
SHUTTER
RELEASE
BUTTON
Lo2J
IN
The
Pentax
645
incorporates
a
motor
drive
unit,
permitting
either
single
or
consecutive
shooting
through
the
C/S
switch.
Select
either
the
C
or
S
position
by
turning
the
C/S
switch.
Single
frame
shooting
(S)
By
depressing
the
shutter
release
button,
a
single
frame
is
exposed
and
automatically
wound
to
the
next
frame,
at
which
point
the
motor
halts.
Consecutive
shooting
(C)
While
the
shutter
release
button
is
kept
depressed,
the
frames
are
continuously
exposed
at
about
1.5
frames/sec.
Once
finger
pressure
is
released
from
the
shutter
release
button,
the
motor
will
halt
after
winding
the
film
to
the
next
frame.
000
Main
switch
and
shutter
release
button
A
light
pressure
upon
the
shutter
release
button
with
the
main
switch
turned
ON
will
immediately
activate
the
exposure
meter
causing
the
LED
indicator
to
appear
in
the
viewfinder
of
the
camera;
further
pressure
on
the
button
will
release
the
shutter.
A
timer
switch
has
also
been
integrated
into
the
exposure
meter
circuit,
and
will
automatically
terminate
power
approximately
30
seconds
after
finger
is
removed
from
the
release
button.
Turning
the
main
switch
off
during
exposure
will
result
in
incorrect
exposure.
20