Pentax Optio E50 Operation Manual - Page 117

9 Use the four-way controller (2345) to choose the paper size. You can only choose a size that is supported by your printer. 10 Press the 4 button. Paper Size Setting Card L 100×150 Postcard 4"×6" MENU Cancel 2L 8"×10" A4 Letter 11"×17" A3 OK OK The Paper Size setting is saved, and the screen returns to the print settings screen. 11 Use the four-way controller (23) to select [Paper Type] and press the four-way controller (5). A pull-down menu appears. 12 Use the four-way controller (23) to select the paper type and press the 4 button. The Paper Type setting is saved, and the screen returns to the print settings screen. Set [Quality] and [Border Status] in the same way as in Steps 11 and 12. If you select [_ Setting] for each print setting, images are printed according to the settings made on the printer. Paper Type with more E supports higher quality paper. 6 Quality with more E indicates higher print quality. The print settings screen appears after each item has been set. 13 Press the 3 button. The screen returns to the confirmation dialog. 14 Press the 4 button. The image is printed according to the settings. Press the 3 button to cancel printing. Editing and Printing Images • The power lamp lights while the camera is communicating with the printer, and blinks while the card is being accessed and during printing. Do not disconnect the USB/AV cable while the power lamp is blinking. • If the picture already has the date imprinted on it (p.78), do not set Date O (On) in DPOF settings. Otherwise, the date could be imprinted twice on your printed picture. The [Paper Size], [Paper Type], [Quality] and [Border Status] settings are reset to the defaults when the camera is turned off. Disconnecting the Cable from the Printer 1p.117 115