Pfaff creative 1473 Owner's Manual - Page 32

Electronic bobbin thread monitoring: Bobbin thread monitor 14 flashes before bobbin thread runs out It goes out again when the full bobbin is inserted and sewing is continued. Important: cover 33 must always be closed. Top and bottom needle position: When the machine stops, the needle goes up. Press key 15 for the needle down position. Display A then lights up and the needle will remain down when sewing is stopped. Press key 15 again. The indicator light goes out and the needle rises and stays at the top posi tion. Electronic actual speed selection: Press key 16 for slow sewing. Display B lights up. The machine sews at half speed. Press key 16 again. The display goes out and the machine sews again at full speed. Tie-off/buttonhole. To sew: Press key 19: Indicator C lights up, the pro grammed seam is tied off at the begin ning, then indicator light C goes out. If you push the key during sewing, the light goes on and a seam is tied off immediately, whereas a pattern is tied off at the end, The display then goes out. Buttonhole: In buttonhole pro grams 150, 151 and 152. key 19 is used for determining and memorizing the length. For more details please see pages 78-97. Reverse sewing: Press key 18 before you start sewing. Indicator light D lights up and the machine sews back wards permanently. If you press the key during sewing, the light will not go on and the machine will sew back wards as long as the key is pressed. Darning: The lengths of darning pro grams 158 and 159 are also deter mined and memorized with key 18. 9R