Pfaff creative 1473 Owner's Manual - Page 46
Cleaning, oiling, Changing, light - parts
View all Pfaff creative 1473 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
4 Cleaning and oiling • Pull out the mains plug. Tilt the needle plate up at the back (A) and remove it (B). Clean the feed dog and the parts in the sewing hook area with a soft brush. Clean the bobbin thread monitor as instructed on page 163. Apply a drop of oil in the hook raceway, as shown in the illustration, every 15 to 20 hours of operation. Other than that, the machine is main tenance-free and must not be oiled. \ Changing the light bulb: • Disconnect the mains plug. Close the hinged top cover and swing up the carrying handle. Insert the edge guide into cutout D, push down the lamp housing and hold it there, Turn the light bulb towards A and take it out. Insert the new bulb so that its pins enter slots C. Push it up and turn it towards B. Pull out the edge guide. Be sure to use only a 15-watt light bulb in the sewing lamp. 42